Pass4Test a capacité d'économiser vos temps et de vous faire plus confiant à réussir le test. Vous pouvez télécharger le démo Microsoft MB3-861 gratuit à connaître mieux la bonne fiabilité de Pass4Test. Nous nous font toujours confiant sur nos produits, et vous aussi dans un temps proche. La réussite de test Microsoft MB3-861 n'est pas loin de vous une fois que vous choisissez le produit de Pass4Test. C'est un choix élégant pour vous faciliter à réussir le test Microsoft MB3-861.
Beaucoup de gens trouvent difficile à passer le test Microsoft 074-338, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test Microsoft 074-338 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.
Pour vous laisser savoir mieux que la Q&A Microsoft MB3-861 produit par Pass4Test est persuadante, le démo de Q&A Microsoft MB3-861 est gratuit à télécharger. Sous l'aide de Pass4Test, vous pouvez non seulement passer le test à la première fois, mais aussi économiser vos temps et efforts. Vous allez trouver les questions presque même que lesquels dans le test réel. C'est pourquoi tous les candidats peuvent réussir le test Microsoft MB3-861 sans aucune doute. C'est aussi un symbole d'un meilleur demain de votre carrière.
Code d'Examen: MB3-861
Nom d'Examen: Microsoft (Microsoft Dynamics GP 2010 Installation & Configuration)
Questions et réponses: 57 Q&As
Code d'Examen: 074-338
Nom d'Examen: Microsoft (Lync 2013 Depth Support Engineer Exam)
Questions et réponses: 114 Q&As
L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification Microsoft 074-338. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification Microsoft 074-338.
Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test Microsoft MB3-861 sans aucune doute si vous choisissez le Pass4Test.
Choisir le Pass4Test peut vous aider à réussir 100% le test Microsoft 074-338 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.
Un bon choix de l'outil à se former est le point essentiel à passer le test Microsoft 074-338, et les documentations à propos de rechercher le test Microsoft 074-338 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.
074-338 Démo gratuit à télécharger: http://www.pass4test.fr/074-338.html
NO.1 You support a Microsoft Lync Server 2013 Enterprise pool named Lync2013.contoso.local.
The pool is configured
with two Session Initiation Protocol (SIP) domains named litware.com and fabrikam.com. The
environment also includes the following:
-three Front End Servers named Lync2013FEl, Lync 2013FE2, and Lync2013FE3 -one Back End Server
named Lync2013BE You plan to install a single Edge Server. You create an Edge pool named
Lync2013Edge.contoso.local. You want to configure the following Edge services:
-Access Edge to use sip.fabrikam.com
-Web Conferencing to use conf.fabrikam.com You also want to enable the federated access feature.
You need to assign internal and external certificates to the Lync 2013 Edge server. Which two
actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Request a private certificate from an internal certificate authority (CA) and include the name
Lync2013Edge.contoso.local. Assign the certificate to internal interface of the Edge Server.
B. Request a wildcard certificate for *.contoso.local from an internal certificate authority (CA).
Assign the certificate to internal and external interfaces of the Edge Server.
C. Request a certificate from a public certificate authority (CA) and include the names
sip.fabrikam.com, sip.litware.com, and conf.fabrikam.com. Assign this certificate to the external
interface of the Edge Server.
D. Request a certificate from a public certificate authority (CA) and include the names
Lyncdiscoverexternal.fabrikam.com and sipfederation.fabrikam.com. Assign the certificate to
internal and external interfaces of the Edge Server.
E. Request a certificate from a public certificate authority (CA) and include the names
sip.fabrikam.com and sip.litware.com. Assign this certificate to the internal interface of Edge Server.
Answer: A,C
certification Microsoft 074-338 examen certification 074-338
Explanation:
Lync Server 2013 uses certificates to provide communications
encryption and server identity authentication. In some cases, such as web publishing through the
reverse proxy, strong subject alternative name (SAN) entry matching to the fully qualified domain
name (FQDN) of the server presenting the service is not required. In these cases, you can use
certificates with wildcard SAN entries (commonly known as "wildcard certificates") to reduce the
cost of a certificate requested from a
public certification authority and to reduce the complexity of the planning process for certificates.
NO.2 You are a member of the CsAdministrator group that supports the Microsoft Lync datacenter
for the Contoso company. The datacenter consists of one pool that is running Lync 2013. Contoso
has a second Active Directory Domain Services (AD DS) site with a domain controller. The Lync
server pool fails. You need to recover the Central Management Store (CMS) and users. Which three
actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A. Run the Invoke-CsPoolFailover cmdlet.
B. Run the New-CsRegistrarConfiguration cmdlet.
C. Run the Install-CsDatabase and Move-CsManagementServer cmdlets.
D. Run the Move-CsDatabase and Set-CsManagementServer cmdlets.
E. Create a Backup pool.
Answer: A,C,E
certification Microsoft certification 074-338 074-338 examen 074-338 074-338
Explanation:
A: Invoke-CsPoolFailover
Invokes the failover process for a Lync Server 2013 pool. Failover refers to the process that occurs
when a pool fails and the current users of that pool are then
signed on to a backup pool. The pool failover process provides a way for administrators to quickly
restore service to users if the Registrar pool they have
logged on to should suddenly become unavailable. If a pool fails, users will automatically be signed
off from Lync Server 2013; if they immediately try to log
back on, they will be redirected to their specified backup pool. C:
* The Move-CsManagementServer cmdlet enables administrators to move the Central Management
Server (and the accompanying Central Management store) from one pool to another. Because there
is always the potential for data loss, not to mention service interruption, any time you move the
Central Management Server, it is recommended that you do not make such a transfer unless:
1.You need to decommission the existing management pool, and must transfer the Central
Management Server before doing so.
2.You've encountered a disaster recovery scenario in which the existing Central Management Server
is no longer accessible.
Before you move the Central Management Server, you must do the following:
*1. Verify that you have created the new Central Management store.
This is done by running the Install-CsDatabase cmdlet and using the CentralManagementDatabase
parameter.
NO.3 You support a Microsoft Lync Server 2013 Enterprise pool deployed in a high availability
configuration for Back End Servers named Backend 1 and Backend2. You execute the
Get-CSDatabaseMirrorState cmdlet and discover the following errors.
You need to resolve the connectivity issue and bring up the mirror databases to the synchronized
state between the Back End Servers. What should you do?
A. From the mirror Back End Server, create the inbound rule on the firewall.
B. From the Front End Server, create the inbound rule on the firewall.
C. Run the Test-CsDatabase cmdlet.
D. Run the Invoke-CsPoolFailOver cmdlet.
Answer: C
Microsoft examen certification 074-338 074-338 074-338 examen
NO.4 You support a customer whose network environment includes Microsoft Lync 2013 deployed
in a datacenter that has two pools, named PoolA and PoolB. Both PoolA and PoolB have Microsoft
Lync Server 2013 installed. You use the Lync Management Shell for all administrative actions.
You run the Invoke-CsPoolFailover PowerShell cmdlet and you receive the following message:
Invoke-CsPoolFailOver: This Front-end pool "poolA.contoso.com" is specified in topology as the next
hop for the Edge server. Failing over this pool may cause External access/Federation/Split-
domain/XMPP features to stop working. Please use Topology Builder to change the Edge internal
next hop setting to point to a different Front-end pool, before you proceed. You need to fail over
PoolA only. What should you do?
A. Run the Get-CsDatabaseMirrorState cmdlet, and then run the
Invoke-CSManagementServerFailover PowerShell cmdlet.
B. Run the Set-CsAccessEdgeConfiguration cmdlet.
C. Run the Set-CsEdgeServer PowerShell cmdlet.
D. Run the Set- CsAVEdgeConfiguration cmdlet
Answer: C
Microsoft 074-338 074-338 examen 074-338 examen
NO.5 You support a customer whose network environment includes Microsoft Lync Server 2013
Standard Edition. Your customer plans to enable sharing of Microsoft PowerPoint content in Lync
meetings. You enable the Office Web Apps Server discovery URL in the Lync Topology. You need to
verify that Lync Server 2013 enables PowerPoint content. What should you do?
A. Check the Event Log of the Front End pool server.
B. Check the Lync Server Control Panel.
C. Check the Event Log of the Office Web Apps server.
D. Verify the connection to the Office Web Apps Discovery URL in a web browser.
Answer: A
Microsoft 074-338 examen 074-338 examen certification 074-338 074-338 examen
NO.6 You deploy Microsoft Lync Server 2013 Enterprise Edition and create a pool named
Lync2013pool.Contoso.local. You configure the Lync admin URL to be admin.contoso.local. The
Front End and Back End roles are installed on servers named FE2013 and BE2013.
You attempt to open the Lync Server Control Panel and you receive an error message. You need to
be able to open the Lync Server Control Panel. Which two actions should you perform? (Each
correct answer presents part of the solution. Choose two.)
A. Create the following DNS A record: lyncdiscoverinternal.contoso.local A 192.168.10.10
B. Create the following DNS A record: admin.contoso.local A 192.163.10.10
C. Create the following DNS A record: Meet.contoso.local A 192.168.10.10
D. Create the following DNS SRV record: _sipinternal._tcp.contoso.local SRV priority 0, weight 0,
port 5061 lync2013pool.contoso.local
E. Create the following DNS A record:lync2013pool.contoso.local A 192.168.10.10
Answer: B,E
Microsoft examen 074-338 certification 074-338
NO.7 You support a customer whose network environment includes Microsoft Lync Server 2013
Standard Edition and Edge Servers. You create a group named HelpDesk You need to grant the
minimum level of permissions necessary for members of HelpDesk to be able to enable or disable
Lync users. What should you do?
A. Assign the CsServerAdministrator role to HelpDesk members.
B. Assign the CsAdministrator role to HelpDesk members.
C. Add HelpDesk members to the group RTCUniversalServersAdmins.
D. Assign the CsUserAdministrator role to HelpDesk members.
Answer: D
Microsoft examen 074-338 074-338 074-338 examen
NO.8 You support a Microsoft Lync Server 2013 environment.
The network includes:
-An Enterprise Edition Front End Pool with two Front End Servers,
-A mediation server that is collocated on the Front End Server, and
-A media gateway with 4 Tl trunks for public switched telephone network (PSTN) connectivity.
Users report intermittent outbound PSTN call failures. There are no issues with inbound PSTN calls.
You view the event log information as shown in the exhibit. (Click the
Exhibit button.)
You need to find out why outbound calls are failing.
Which two event IDs should you investigate? (Each correct answer presents a complete solution.
Choose two.)
A. 44009
B. 46009
C. 46026
D. 46027
Answer: B,D
Microsoft examen 074-338 074-338 074-338 074-338 examen
Explanation:
Investigate the first error related to LS Outbound Routing (Event ID 46009) and the next event
related to LS Outbound Routing (information level event 46027).
没有评论:
发表评论