Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification HP HP0-Y49. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test HP HP0-P13 sans aucune doute si vous choisissez le Pass4Test.
Le test HP HP0-P13 est bien populaire dans l'Industrie IT. Mais ça coûte beaucoup de temps pour bien préparer le test. Le temps est certainemetn la fortune dans cette société. L'outil de formation offert par Pass4Test ne vous demande que 20 heures pour renforcer les connaissances essentales pour le test HP HP0-P13. Vous aurez une meilleure préparation bien que ce soit la première fois à participer le test.
Code d'Examen: HP0-Y49
Nom d'Examen: HP (HP ATP FlexNetwork Solutions)
Questions et réponses: 65 Q&As
Code d'Examen: HP0-P13
Nom d'Examen: HP (Planning and Design of HP Integrity Server Solutions)
Questions et réponses: 70 Q&As
Pass4Test est un site à offrir les Q&As de tout les tests Certification IT. Chez Pass4Test, vous pouvez trouvez de meilleurs matériaux. Nos guides d'étude vous permettent de réussir le test Certification HP HP0-Y49 sans aucune doute, sinon nous allons rendre votre argent d'acheter la Q&A et la mettre à jour tout de suite, en fait, c'est une situation très rare. Bien que il existe plusieurs façons à améliorer votre concurrence de carrière, Pass4Test est lequel plus efficace : Moins d'argent et moins de temps dépensés, plus sûr à passer le test Certification. De plus, un an de service après vendre est gratuit pour vous.
L'importance de la position de Certificat HP HP0-Y49 dans l'industrie IT est bien claire pour tout le monde, mais c'est pas facile à obtenir ce Certificat. Il y a beaucoup de Q&As qui manquent une haute précision des réponses. Cependant, Pass4Test peut offrir des matériaux pratiques pour toutes les personnes à participer l'examen de Certification, et il peut aussi offrir à tout moment toutes les informations que vous auriez besoin à réussir l'examen HP HP0-Y49 par votre première fois.
Maintenant, beaucoup de professionnels IT prennent un même point de vue que le test HP HP0-Y49 est le tremplin à surmonter la pointe de l'Industrie IT. Beaucoup de professionnels IT mettent les yeux au test Certification HP HP0-Y49.
HP0-Y49 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y49.html
NO.1 A network administrator executes these commands on an HP Comware switch:
[Comware] super password level 1 simple hp1 [Comware] super password level 2 simple hp2
[Comware] super password level 3 simple hp3 [Comware] quit <Comware>
The network administrator then executes this command to test the configuration: <Comware>
super 0
What is the outcome of the configuration?
A. The network administrator is immediately placed into Monitor view.
B. Access is denied because no level 0 password has been defined.
C. A password of hp0 must be entered to access the view.
D. The network administrator is immediately placed into visitor view.
Answer: D
HP examen certification HP0-Y49 HP0-Y49 examen HP0-Y49 examen HP0-Y49
NO.2 When LLDP is enabled, which value is presented by default as the LLDP Chassis ID on both
ProVision and Comware switches?
A. Router ID
B. System Name
C. IP address
D. MAC address
Answer: D
HP HP0-Y49 HP0-Y49 examen certification HP0-Y49
Explanation:
<Sysname> display lldp local-information
Global LLDP local-information: Chassis ID : 00e0-fc00-5600 System name : Sysname System
description : H3C Comware Software. H3C S12508 Product Version S12500-C
MW710-B01BBIT25. Copyright (c) 2004-2011 Hangzhou H3C Tec
h. Co., Ltd. All rights reserved. System capabilities supported : Bridge, Router System capabilities
enabled : Bridge, Router
MED information: Device class : Connectivity device MED inventory information of master board:
HardwareRev : REV.A FirmwareRev : 109 SoftwareRev : 5.20 Alpha 2101 SerialNum : NONE
Manufacturer name : H3C Model name : H3C Comware Asset tracking identifier : Unknown
Table 1 Command output Field Description Global LLDP local-information Global LLDP information
to be sent. Chassis ID Bridge MAC address of the device.
Reference:
http://www.h3c.com/portal/Technical_Support___Documents/Technical_Documents/Switch
es/H3C_S12500_Series_Switches/Command/Command/H3C_S12500_CR-Release71286W710/ 04 / 20
1301 /772500_1285_0.htm
4. Refer to the exhibit. Exhibit: Network topology
The server shown in the exhibit is configured for dynamic LACP . There is only one link between
Switch 1 and Switch 2. Which HP switching solution should the network administrator implement?
A. Distributed trunking on Comware Switches or ProVision switches
B. IRF on Comware switches or Provision switches
C. IRF on Comware switches or but not on ProVision switches
D. Distributed trunking on ProVision switches but not on Comware switches
Answer: C
certification HP certification HP0-Y49 HP0-Y49 examen HP0-Y49 examen HP0-Y49 examen
5. Which open standard allows a switch with PoE support to correctly determine the power
requirements of a connected device?
A. ICMP
B. AutoPower
C. LLDP-MED
D. CDP
Answer: C
certification HP certification HP0-Y49 HP0-Y49 examen HP0-Y49 examen
Explanation:
The Link Layer Discovery Protocol (LLDP) is a vendor-neutral link layer protocol in the Internet
Protocol Suite used by network devices for advertising their identity, capabilities, and neighbors on
an IEEE 802 local area network, principally wired Ethernet. Media Endpoint Discovery is an
enhancement of LLDP , known as LLDP-MED, that provides the following facilities:
- Auto-discovery of LAN policies (such as VLAN, Layer 2 Priority and Differentiated services settings)
enabling plug and play networking. - Device location discovery to allow creation of location
databases and, in the case of Voice over Internet Protocol (VoIP), Enhanced 911 services. - Extended
and automated power management of Power over Ethernet (PoE) end points.
6. Which HP solution delivers automated virtual machine orchestrator, automatic
synchronization of network connectivity information, and visibility to performance of wired and
wireless users?
A. Unified Wired-WLAN modules and switches
B. Intelligent Management Center (IMC)
C. Virtual Connect FlexFabric
D. Intelligent Resilient Framework
Answer: B
certification HP certification HP0-Y49 HP0-Y49 examen certification HP0-Y49
Reference: http://h17007.www1.hp.com/docs/mark/ 4AA3-4496ENW.pdf
7. Which HP Intelligent Management Center (IMC) component would a network administrator
check to verify the installation of IMC or an add-on module?
A. Deployment Monitoring Agent
B. Deployment Analyzer
C. Service Manager
D. Process Manager
Answer: A
HP examen HP0-Y49 examen certification HP0-Y49 HP0-Y49 examen HP0-Y49 certification HP0-Y49
8. Which HP Comware component allows a network administrator to adjust the logging process?
A. SNMP management center
B. Information center
C. Logging process
D. System logging center
Answer: B
HP examen certification HP0-Y49 certification HP0-Y49
Explanation:
Acting as the system information hub, information center classifies and manages system
information, offering a powerful support for network administrators and developers in
monitoring network performance and diagnosing network problems.
The following describes the working process of information center:
- Receives the log, trap, and debugging information generated by each module. - Outputs the above
information to different information channels according to the user-defined output rules. - Outputs
the information to different destinations based on the information channel-to-destination
associations.
9. Two OSPF routers are on a segment, and both of their interfaces become active. What is the
initial OSPF state after an adjacency has formed?
A. Established
B. Exstart
C. Two-way
D. Full
Answer: B
certification HP HP0-Y49 examen HP0-Y49 examen certification HP0-Y49 HP0-Y49 certification HP0-Y49
10. What does an IP host learn from an ARP reply?
A. An IP address
B. The local subnet
C. A MAC address
D. A Netbios name
Answer: C
HP examen certification HP0-Y49 HP0-Y49 examen
NO.3 Which command can a network administrator execute to manage configuration files on an HP
Comware switch?
A. Write file
B. Startup-default
C. Delete
D. Write memory
Answer: C
HP HP0-Y49 examen certification HP0-Y49
没有评论:
发表评论