显示标签为“070-662”的博文。显示所有博文
显示标签为“070-662”的博文。显示所有博文

2013年11月19日星期二

Microsoft meilleur examen 070-662, questions et réponses

Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification Microsoft 070-662, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification Microsoft 070-662. Peut-être d'obtenir le Certificat Microsoft 070-662 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.

Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test Microsoft 070-662 sans aucune doute si vous choisissez le Pass4Test.

Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test Microsoft 070-662 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test Microsoft 070-662 réel est lancée. C'est possible à réussir 100% avec le produit de Microsoft 070-662. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.

Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test Microsoft 070-662. Pass4Test a une expérience riche pour répondre les demandes des candidats.

Le Certificat de Microsoft 070-662 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat Microsoft 070-662, c'est-à-dire avoir une grande fortune. Le Certificat Microsoft 070-662 peut bien tester des connaissances professionnelles IT. La Q&A Microsoft 070-662 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.

Code d'Examen: 070-662
Nom d'Examen: Microsoft (TS: Microsoft Exchange Server)
Questions et réponses: 395 Q&As

Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.

Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A Microsoft 070-662 est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.

070-662 Démo gratuit à télécharger: http://www.pass4test.fr/070-662.html

NO.1 You have an Exchange Server 2010 Service Pack 1 (SP1) Mailbox server named Server1.You need to
ensure that a copy of each email message modified or deleted by a user named User1 isretained on
Server1.
What should you do?
A. Create a personal tag.
B. Enable single item recovery.
C. Enable message tracking
D. Enable a litigation hold
E. Create a retention policy
F. Create a journal rule
Answer: D

Microsoft examen   070-662   certification 070-662   070-662   070-662

NO.2 Your network contains an Active Directory domain named contoso.com. All domain controllers run
Windows Server 2008 R2.You have a server named Server1 that runs Windows Server 2008 R2 Service
Pack 1 (SP1).You plan to install the following Exchange Server 2010 SP1 server roles on
Server1:-Mailbox-Client Access-Hub Transport
You need to prepare Served for the planned installation. You import the Server Manager module for
Windows Power Shell.
What should you do next?
A. From Windows PowerShell, run add-windowsfeature net-framework,rsat,adlds.
B. At the command prompt, run servermanagercmd and use the Exchange-Typical.xml template.
C. From Windows PowerShell, run add-windowsfeature net-framework. From the Exchange Server 2010
installation program, select the Automatically install Windows Server roles and features required for
Exchange Server check box.
D. At the command prompt, run servermanagercmd and use the Exchange-Elase.xml template.
E. At the command prompt, run setup /pl. From the Exchange Server 2010 installation program, select the
Automatically install Windows Server roles and features required for Exchange Server check box.
F. From Windows PowerShell, run add-windowsfeature
net-framework,rsat-adds,web-server,web-basic-auth.
Answer: C

Microsoft   070-662 examen   certification 070-662   certification 070-662   certification 070-662

NO.3 You have an Exchange Server 2010 Service Pack 1 (SP1) organization named fabrikam.com A partner
company has an Exchange Server 2010 Service Pack 1 (SP1) organization named contoso.com. You
plan to implement federated delegation between fabrikam.com and contoso.com. You need to identify
which DNS records must be created to support federated delegation. Which DNS records should you
identify? (Choose all that apply.)
A. Host (A)
B. Mail exchanger (MX)
C. Host information (HINFO)
D. Text (TXT)
E. Mail group (MG)
Answer: AD

certification Microsoft   070-662   070-662

NO.4 You have an Exchange Server 2010 Service Pack1 organization. The Organization contains a Hub
Transport server named Server1 and an Edge Transport sever named server2.
All servers are configured to use an internal DNS named DNS1 for host resolution.
You configure an Edge Subscription from Server1 to Server2.
You need to modify the delayed acknowledgment (ACK) setting of Server2.
What should you do?
A. From the Exchange Management Console (EMC), modify the properties of the accepted domain.
B. From the Exchange Management Console (EMC), create a transport rule.
C. From the Exchange Management Shell, run the Set-TransportServer cmdlet.
D. From the Exchange Management Shell, run the Set-ReceiveConnector cmdlet.
E. From the Exchange Management Console (EMC), disable the IP Block List feature.
F. From the Exchange Management Shell, run the Set-TransportAgent cmdlet.
G. From the Exchange Management Shell, run the Set-TransportConfig cmdlet.
H. From the Exchange Management Console (EMC), modify the properties of the remote domain.
Answer: D

Microsoft   certification 070-662   certification 070-662   certification 070-662

NO.5 Your network contains an Active Directory domain. The domain contains one site.
You have an Exchange Server 2010 Service Pack 1 (SP1) organization that contains two Client
Accessservers, two Hub Transport servers, and three Mailbox servers.
The mailbox servers are members of a database availability group (DAG) named DAG1.
You have a mailbox database named DB1.You configure two mailbox database copies of DB1.You verify
that both mailbox database copies have a status of Healthy.
You need to ensure that an administrator is notified when the health status of a mailbox database
copychanges.
What should you run from the Exchange Management Shell?
A. Test-WebServicesConnectivity
B. Test-SystemHealth
C. Test-AvailabilityService
D. checkdatabaseredundancy.ps1
E. Test-ReplicationHealth
F. Test-SmtpConnectivity
G. Get-MailboxDataboxCopyStatus
H. Retry-Queue
I. Test-MailFlow
J. Get-MailboxDatabase
K. Test-SenderId
L. Get-SenderIdConfig
M. Test-MapiConnectivity
N. Test-OutlookWebServices
Answer: D

Microsoft   070-662 examen   070-662   certification 070-662

NO.6 You have an Exchange Server 2010 Service Pack1 (SP1) organization. The organization contains the
servers configured as shown in the following table
The Mailbox servers are members of a database availability group (DAG) named DAG1.The organization
also has a load balancing solution for Client Access. The load balancing solution has a
virtual IP address that is available by using the mail.contoso.com host name.
You create a new Client Access array that uses the outlook.contoso.com fully qualified name (FQFN)
You need to ensure that all users connect to outlook.contoso.com from Microsoft Outlook 2010.
Which Windows Powershell should you run
A. Set-MailbxDatabaseCopy
B. New-DatabaseAvailabilityGroup
C. Set-MailboxServer
D. Set-ClientAccessServer
E. New-PublicMailboxDatabase
F. New-PublicFolderDatabase
G. Set-ClientAccessArray
H. Add-MailboxDatabaseCopy
I. Set-DatabaseAvailabilityGroup
J. Set-PublicFolderDatabae
K. Add-RoleGroupMember
L. Add-DatabaseAvailabilityGroupServer
M. Set-MailboxDatabase
Answer: M

Microsoft   certification 070-662   070-662 examen   070-662

NO.7 You have an Exchange Server 2010 Service Pack 1 (SP1) organization. The SMTP domain for
theorganization is contoso.com.
You enable the Exchange anti-spam features. You need to specify a quarantine mailbox for the Exchange
organization.
What should you do?
A. From the Exchange Management Console (EMC), modify the Content Filter agent.
B. Run the Set-ContentFilterConfig cmdlet from the Exchange Management Shell.
C. Run the Set-TransportConfig cmdlet from the Exchange Management Shell.
D. From the Exchange Management Console (EMC), modify the Recipient Filter agent.
E. Run the New-TransportRule cmdlet from the Exchange Management Shell.
F. Run the Set-OrganizationConfig cmdlet from the Exchange Management Shell.
G. From the Exchange Management Console (EMC), modify the Sender Filter agent.
H. Run the New-JournalRule cmdlet from the Exchange Management Shell.
Answer: B

Microsoft   certification 070-662   070-662   070-662

NO.8 You have a hosted Exchange organization. All servers in the organization have Exchange Server 2010
SP1 installed.
You need to group a set of users for administrative delegation.
What should you create?
A. A new distribution group
B. A new management role
C. a managed folder mailbox policy
D. a new role assignment
Answer: D

Microsoft   certification 070-662   070-662   070-662

NO.9 You have an Exchange Server 2010 Service Pack 1 (SP1) organization named contoso.com.
All users access their mailbox by using Microsoft Outlook 2010.You need to ensure that the users can
prevent sensitive email messages from being forwarded to otherrecipients.
What should you first?
A. Configure Transport Layer Security (TLS) on all Send connectors
B. Install Active Directory Rights Management Services (AD RMS).
C. Run the Set-TransportConfig cmdlet.
D. Deploy Secure MIME.
Answer: B

Microsoft examen   certification 070-662   070-662   070-662   certification 070-662

NO.10 You have an Exchange Server 2010 Service Pack1 organization. The Organization contains a
HubTransport server named Server1 and an Edge Transport sever named server2.All servers are
configured to use an internal DNS named DNS1 for host resolution.
You configure an Edge Subscription from Server1 to Server2.You deploy a monitoring server named
ServerApp1. ServerApp1 will send email notification toadministrators.
You need to ensure that ServerApp1 can relay email to the administrators through Server1.
What should you do?
A. From the Exchange Management Shell, run the Set-TransportServer cmdlet.
B. From the Exchange Management Shell, run the Set-TransportConfig cmdlet.
C. From the Exchange Management Console (EMC), create a transport rule.
D. From the Exchange Management Console (EMC), modify the properties of the remote domain.
E. From the Exchange Management Shell, run the Set-receiveConnector cmdlet.
F. From the Exchange Management Console (EMC), disable the IP Block List feature.
G. From the Exchange Management Console (EMC), modify the properties of the accepted domain.
H. From the Exchange Management Shell, run the Set-TransportAgent cmdlet.
Answer: E

Microsoft examen   certification 070-662   070-662   070-662 examen   070-662   070-662

NO.11 Your network contains two Active Directory forests named contoso and nwtraders. The contoso forest
contains Exchange 2003 SP2 Servers. The nwtraders forest contains Exchange 2010 SP1 Servers.
You need to move all mailboxes from contoso to nwtraders.
What should you do from nwtraders forest?
A. Create a mail enabled contact for each mailbox in contoso. Run the Move-Mailbox cmdlet.
B. Create a mail enabled user for each mailbox in contoso. Run the New-MoveRequest cmdlet.
C. Create a linked mailbox for each mailbox in contoso. Run Move-Mailbox cmdlet.
D. Create a shared mailbox for each mailbox in contoso. Run the New-MoveRequest cmdlet.
Answer: B

Microsoft   certification 070-662   certification 070-662   070-662   certification 070-662   070-662

NO.12 You have an Exchange organization. All servers in the organization have Exchange Server 2010 SP1
installed.
You need to ensure that each user who sends a meeting request to a room mailbox receives a custom
message from the mailbox.
What should you do from the properties of the mailbox?
A. Configure the Mailbox Features settings.
B. Configure the Mail Flow settings.
C. Enable the Resource Booking Attendant.
D. Configure the Resource Information settings.
E. Configure the Resource In-Policy Requests settings.
F. Configure the Resource Out-of-policy Requests settings.
G. Configure the Account settings.
H. Configure the Resource Policy settings.
Answer: D

Microsoft examen   certification 070-662   070-662   070-662   070-662

NO.13 You have an Exchange organization. All servers in the organization have Exchange Server 2010 SP1
installed.
You need to ensure that an equipment mailbox can be scheduled for meetings that occur during working
hours only.
What should you do from the properties of the mailbox?
A. Configure the Mailbox Features settings.
B. Configure the Resource Policy settings.
C. Enable the Resource Booking Attendant.
D. Configure the Resource In-Policy Requests settings.
E. Configure the Mail Flow settings.
F. Configure the Account settings.
G. Configure the Resource Out-of-Policy Requests settings.
H. Configure the Resource Information settings.
Answer: B

Microsoft examen   070-662   070-662

NO.14 The network contains an Active Directory domain. The domain contains one site.
You have an Exchange Server 2010 Service Pack 1 (SP1) organization that contains two Client Access
servers, two Hub Transport servers, and users report that they fail to receive email messages from the
Internet.
You review the message tracking logs and discover that the organization failed to receive any email
messages from the Internet during the past hour.
You need to identify what is prevening the hub Transport servers from receiving email messages.
What should run from the Exchange Management Shell?
A. Test-WebServicesConnectivity
B. Test-MailFlow
C. Get-MailboxDatabase
D. Test-MapiConnectivity
E. Test-ReplicationHealth
F. Test-AvailabilityService
G. Get-SenderIdConfig
H. Test-SMTPConnectivity
I. Checkdatabaseseredundancy.ps1
J. Retry-Queue
K. Test-SenderID
L. Get-MailboxDatabaseCopyStatus
M. Test-SystemHealth
N. Test-OutlookWebServices
Answer: H

Microsoft   070-662   certification 070-662   070-662   certification 070-662

NO.15 Your network contains an Active Directory forest named fabrikam.com. The forest contains an
Exchange Server 2010 Service Pack 1 (SP1) organization.
All client computers run Microsoft Office Outlook 2003.A server named Ex1 hosts all public folders. You
upgrade all of the client computers to Outlook 2010.You need to remove all of the public folders from Ex1.
What should you do first.?
A. Modify the offline address book (OAB) distribution settings.
B. Modify the properties of the mailbox database.
C. Delete all of the public folders from the public folder database.
D. Perform an offline defragmentation of the public folder database files.
Answer: A

Microsoft examen   070-662   070-662 examen   certification 070-662   070-662

NO.16 You have an Exchange Server 2010 Service Pack1 (SP1) organization. The organization contains the
servers configured as shown in the following table
The Mailbox servers are members of a database availability group (DAG) named DAG1.
You need to configure DAG1 to use a static DAG IP 192.168.1.100
Which Windows PowerShell cmdlet should you run?
A. Set-MailboxServer
B. Set-DatabaseAvailabilityGroup
C. New-DatabaseAvailabilityGroup
D. Add-MailboxDatabaseCopy
E. Add-DatabaseAvailabilityGroupServer
F. Set-MailboxDatabase
G. Set-ClientAccessServer
H. Set-ClientAccessArray
I. Set-PublicFolderDatabae
J. New-PublicFolderDatabase
K. Add-RoleGroupMember
L. Set-MailbxDatabaseCopy
M. New-MailboxDatabase
Answer: B

Microsoft examen   certification 070-662   070-662   070-662   070-662

NO.17 You are a network administrator for a company named Contoso, Ltd. Contoso has an Exchange Server
2010 Service Pack 1 (SP1) organization named contoso.com. The organization contains the following
Exchange servers: -Two Hub Transport servers -Two Edge Transport servers that have Edge
Subscriptions Contoso merges with another company named Fabrikam, Inc. Fabrikam has an Exchange
Server 2010 SP1 organization that uses the fabrikam.com SMTP domain.
All mail exchange (MX) records for fabrikam.com point to the contoso.com Edge Transport servers.
You deploy a solution for Contoso to journal all email messages by using Hub Transport rules.
You need to ensure that all email messages received by fabrikam.com users from the Internet are
journaled by the contoso.com Exchange organization.
What should you do?
A. From the Exchange Management Shell, run the new-accepteddornain -domaintypeinternalrelay
command.
B. From the Exchange Management Shell, run the new-sendconnector -addressspaces fabrikam.com
command.
C. From the Exchange Management Console (EMC), create an accepted domain that uses the
authoritative domain type.
D. From the Exchange Management Shell, run the new-receiveconnector -partner command.
E. From the Exchange Management Shell, run the new-accepteddornain -domaintypeexternalrelay
command.
F. From the Exchange Management Console (EMC), create an accepted domain that uses the internal
relay domain type.
Answer: C

Microsoft   070-662   070-662   certification 070-662

NO.18 You have an Exchange organization. All servers in the organization have Exchange Server 2010
SP1installed.The organization contains a distribution group named Group1.You need to ensure that a
user named User1 can review and approve all messages sent to Group1.What should you do?
A. Modify the Managed By list for Group1.
B. Create a new journal rule and specify user1 as the journal recipient.
C. Modify the mail flow settings for User1.
D. Modify the mail flow settings for Group1.
Answer: D

Microsoft   certification 070-662   070-662   070-662 examen   070-662

NO.19 Your network contains an Active Directory domain named contoso.com. You have an Exchange Server
2010 Service Pack 1 (SP1) organization. External users access their email by Outlook Web Apps. On you
need to ensure that the external users can log on to Outlook Web App without specifying a domain name.
Which cmdlet should you use?
A. Set-OrganizationConfig
B. Set-OwaVirtualDirectory
C. New-OrganizationRelationShip
D. New-OwaMailboxPolicy
Answer: B

Microsoft   certification 070-662   070-662   070-662   certification 070-662

NO.20 Your company has two offices. Each office is configured as an Active Directory site. The offices connect
to each other by using a congested WAN link. Each office has a direct, high-speed connection to the
Internet. Each site contains two Exchange Server 2010 Service Pack 1 (SP1) Hub Transport servers. You
need to ensure that email messages sent to the Internet from the Exchange organization are neverrouted
over the WAN link.
What should you do from each site?
A. From the Exchange Management Shell, run the Set-TransportConfig crndlet
B. From the Exchange Management Console (EMC), modify the properties of the accepted domain
C. From the Exchange Management Shell, run the Set-SendConnector cmdlet
D. From the Exchange Management Console (EMC), modify the properties of the Receive connector
E. From the Exchange Management Console (EMC), modify the properties of the Send connector
F. From the Exchange Management Console (EMC), modify the properties of the remote domain
G. From the Exchange Management Shell, run the Set-ForeignConnector cmdlet
H. From the Exchange Management Shell, run the Set-TransportAgent cmdlet
Answer: C

Microsoft   070-662   070-662 examen   070-662   070-662

Après une longue attente, les documentations de test Microsoft 070-662 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test Microsoft 070-662 à la première fois.

2013年8月5日星期一

Le plus récent matériel de formation Microsoft 070-685 070-658 070-646 070-686 070-662 070-565

Pass4Test est un site à offrir particulièrement la Q&A Microsoft 070-685 070-658 070-646 070-686 070-662 070-565, vous pouvez non seulement aprrendre plus de connaissances professionnelles, et encore obtenir le Passport de Certification Microsoft 070-685 070-658 070-646 070-686 070-662 070-565, et trouver un meilleur travail plus tard. Les documentations offertes par Pass4Test sont tout étudiés par les experts de Pass4Test en profitant leurs connaissances et expériences, ces Q&As sont impresionnées par une bonne qualité. Il ne faut que choisir Pass4Test, vous pouvez non seulement passer le test Microsoft 070-685 070-658 070-646 070-686 070-662 070-565 et même se renforcer vos connaissances professionnelles IT.


Pass4Test est un seul site web qui peut offrir toutes les documentations de test Microsoft 070-685 070-658 070-646 070-686 070-662 070-565. Ce ne sera pas un problème à réussir le test Microsoft 070-685 070-658 070-646 070-686 070-662 070-565 si vous préparez le test avec notre guide d'étude.


Code d'Examen: 070-685

Nom d'Examen: Microsoft (Pro: Windows 7, Enterprise Desktop Support Technician)

Questions et réponses: 191 Q&As

Code d'Examen: 070-658

Nom d'Examen: Microsoft (TS: System Center Data Protection Manager 2007, Configuring (English))

Questions et réponses: 73 Q&As

Code d'Examen: 070-646

Nom d'Examen: Microsoft (Windows Server 2008, Server Administrator)

Questions et réponses: 258 Q&As

Code d'Examen: 070-686

Nom d'Examen: Microsoft (Pro: Windows 7, Enterprise Desktop Administrator)

Questions et réponses: 185 Q&As

Code d'Examen: 070-662

Nom d'Examen: Microsoft (TS: Microsoft Exchange Server)

Questions et réponses: 395 Q&As

Code d'Examen: 070-565

Nom d'Examen: Microsoft (Pro: Designing and Developing Enterprise Applications Using the Microsoft .NET Framework 3.5)

Questions et réponses: 138 Q&As

Beaucoup de gens trouvent difficile à passer le test Microsoft 070-685 070-658 070-646 070-686 070-662 070-565, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test Microsoft 070-685 070-658 070-646 070-686 070-662 070-565 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.


L'équipe de Pass4Test autorisée offre sans arrêt les bonnes resources aux candidats de test Certification Microsoft 070-685 070-658 070-646 070-686 070-662 070-565. Les documentations particulièrement visée au test Microsoft 070-685 070-658 070-646 070-686 070-662 070-565 aide beaucoup de candidats. La Q&A de la version plus nouvelle est lancée maintenant. Vous pouvez télécharger le démo gratuit en Internet. Généralement, vous pouvez réussir le test 100% avec l'aide de Pass4Test, c'est un fait preuvé par les professionnels réputés IT. Ajoutez le produit au panier, vous êtes l'ensuite à réussir le test Microsoft 070-685 070-658 070-646 070-686 070-662 070-565.


070-686 Démo gratuit à télécharger: http://www.pass4test.fr/070-686.html


NO.1 Your network has client computers that run Windows XP. All users access a custom line-ofbusiness
application. The line-of-business application is not compatible with Windows 7.
You are planning to deploy Windows 7.
You have the following requirements:
The application must run on all client computers.
The application executable must reside on each client computer.
You need to manage application compatibility to meet the requirements.
What should you do?
A.
Install the application on a Remote Desktop Services server.
B.
Install a shim for the application on each client computer.
C.
Virtualize the application by using Microsoft Application Virtualization (App-V).
D.
Install the Windows Compatibility Evaluator on each client computer.
Answer: B

Microsoft   070-686   070-686   070-686 examen

NO.2 Your network has client computers that run Windows Vista.
You are planning to deploy Windows 7.
You need to detect and analyze the compatibility of an application that requires elevated
privileges.
What should you do?
A.
Use the Standard User Analyzer (SUA) Wizard.
B.
Run a virtual version of the Setup Analysis Tool (SAT).
C.
Use the Standard User Analyzer (SUA) tool.
D.
Run a stand-alone version of the Setup Analysis Tool (SAT).
Answer: C

Microsoft examen   certification 070-686   certification 070-686   certification 070-686

NO.3 You use Group Policy to standardize Internet Explorer settings on Windows 7 client computers.
Users occasionally change the Internet Explorer settings on individual client computers.
The company wants to maintain a standard Internet Explorer configuration on all client
computers.
You need to ensure that the standard Internet Explorer configuration is in place each time users
log on to client computers.
What should you do?
A.
Use Group Policy to disable the Advanced tab of the Internet Explorer Properties dialog box.
B.
Use the Group Policy Update utility to refresh Group Policy.
C.
Enable Internet Explorer Maintenance Policy Processing in Group Policy.
D.
Enable User Group Policy loopback processing mode.
Answer: C

Microsoft examen   certification 070-686   certification 070-686   070-686   070-686   070-686

NO.4 Your company has a single Active Directory Domain Services (AD DS) domain with Windows
Server 2008 R2 member servers and 1,000 Windows 7 client computers.
You are designing the deployment of a custom application.
You have the following requirements:
- The application must be available to only users who need it.- Minimize network traffic during
deployment.
- You need to design a deployment strategy that meets the requirements.
Which deployment method should you use?
A.
Microsoft Application Virtualization (App-V)
B.
Microsoft System Center Configuration Manager 2007
C.
RemoteApp and Desktop Connections
D.
software installation in Group Policy
Answer: C

Microsoft examen   070-686   070-686   certification 070-686

NO.5 Your company has an Active Directory Domain Services (AD DS) forest with a single domain
named contoso.com. The design of the organizational units (OUs) and Group Policy objects
(GPOs) is shown in the following diagram.
Multiple computer configuration settings and user configuration settings are defined in the Kiosk
Computers GPO.
A security audit indicates that user configuration settings that are defined in the Kiosk Computers
GPO are not applied when users log on to client computers that are in the Kiosk Computers OU.
You need to ensure that the user configuration settings are correctly applied.
What should you do?
A.
Enable loopback processing in Merge mode on the Default Domain Policy GPO.
B.
Disable the user configuration settings on the Default Domain Policy GPO.
C.
Enable loopback processing in Replace mode on the Kiosk Computers GPO.
D.
Disable the user configuration settings on the New York Users GPO.
Answer: C

Microsoft examen   070-686   certification 070-686   certification 070-686   certification 070-686

NO.6 You have a single Active Directory Domain Services (AD DS) site. All client computers run
Windows 7. Users in the marketing department use a custom application.
You create a new Group Policy object (GPO) and link it to the site. Users in the marketing
department then report that they are unable to use the custom application.
You need to ensure that all users in the marketing department are able to use the custom
application. You need to ensure that all other users continue to receive the new GPO.
What should you do?
A.
Add marketing users to a domain group. Use security filtering to grant the group the Allow-Read
permission and the Allow-Apply Group Policy permission for the GPO.
B.
Move marketing users to a dedicated organizational unit (OU). Apply the Block Inheritance
setting to the OU.
C.
Add marketing users to a domain group. Use security filtering to grant the group the Allow-Read
permission and the Deny-Apply Group Policy permission for the GPO.
D.
Move marketing users to a dedicated organizational unit (OU). Apply the Block Inheritance
setting to the domain.
Answer: C

Microsoft examen   070-686   070-686 examen   070-686

NO.7 Your companys network has client computers that run Windows 7. Multiple users share the
computers in the shipping department. These computers reside in the Shipping Computers
organizational unit (OU).
The network design is shown in the following diagram.
You are planning to deploy an application. The application is packaged as a Microsoft Windows
Installer package (MSI).
You need to deploy the application only to computers in the shipping department.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)
A.
Link the software installation policy to the Workstations OU.
B.
Link the software installation policy to the Shipping Computers OU.
C.
Create a new Group Policy object (GPO) and add a software installation policy under the User
Configuration container.
D.
Create a new Group Policy object (GPO) and add a software installation policy under the
Computer Configuration container.
Answer: BD

Microsoft examen   070-686   070-686   070-686 examen

NO.8 Your companys network includes client computers that run Windows 7. You design a wireless network
to use Extensible Authentication ProtocolCTransport Level Security
(EAP-TLS). The Network Policy Server has a certificate installed.
Client computers are unable to connect to the wireless access points.
You need to enable client computers to connect to the wireless network.
What should you do?
A.
Install a certificate in the Trusted Root Certification Authorities certificate store.
B.
Configure client computers to use Protected Extensible Authentication ProtocolCTransport
Layer Security (PEAP-TLS).
C.
Configure client computers to use Protected Extensible Authentication Protocol-Microsoft
Challenge Handshake Authentication Protocol version 2 (PEAP-MS-CHAP v2).
D.
Install a certificate in the Third-Party Root Certification Authorities certificate store.
Answer: A

Microsoft examen   070-686 examen   070-686   070-686

NO.9 Your company has 1,000 Windows XP computers. You plan to migrate these computers to
Windows 7.
You need to detect compatibility issues that can occur during the installation and configuration
process for a specific application.
Which tool should you use?
A.
Windows Compatibility Evaluator
B.
Setup Analysis Tool
C.
Inventory Collector
D.
Update Compatibility Evaluator
Answer: B

certification Microsoft   070-686   070-686 examen   070-686 examen   certification 070-686

NO.10 All client computers in an organization run Windows 7 and are joined to an Active Directory
Domain Services (AD DS) domain. All user objects are stored in an Organizational Unit (OU)
named Contoso Users. All computer objects are stored in an OU named Contoso Computers.
You need to add a proxy server to the Microsoft Internet Explorer 9 configuration on all client
computers by using the least administrative effort.
Which three actions should you perform? (To answer, move the appropriate action from the list of
actions to the answer area and arrange them in the correct order.)
Answer:

NO.11 Your network consists of an Active Directory Domain Services (AD DS) forest with 1,000 client
computers that run Windows XP. Nine hundred of the computers are on the local area network.
One hundred computers are portable computers that connect to the main office only once every
few months.
You are planning to deploy Windows 7.
You need to generate a report of the software that is installed on all client computers. You need
this information as soon as possible.
What should you use?
A.
Microsoft System Center Data Protection Manager
B.
Microsoft Desktop Optimization Pack
C.
Microsoft System Center Essentials
D.
Microsoft System Center Operations Manager
Answer: B

Microsoft   070-686   certification 070-686

NO.12 Your company infrastructure includes a Windows Server 2008 R2 file server and 1,000 Windows 7
Enterprise client computers.
The company wants to require a secure connection between client computers and the file server.
You need to create and deploy a Group Policy object (GPO) that includes a rule for Windows
Firewall with Advanced Security.
What should you do?
A.
Create an Isolation rule and specify Request authentication for inbound and outbound
connections.
B.
Create a Tunnel rule and specify Gateway-to-client as the tunnel type.
C.
Create a Server-to-server rule and specify the endpoints as Any IP address and the file server
IP address.
D.
Create an Authentication exemption rule and add the file server IP address to the Exempt
Computers list.
Answer: C

Microsoft   certification 070-686   070-686

NO.13 Your network has client computers that run Windows 7 Enterprise. You plan to deploy new
administrative template policy settings by using custom ADMX files. You create the custom ADMX
files, and you save them on a network share. You start Group Policy Object Editor (GPO Editor).
The custom ADMX files are not available in the Group Policy editing session. You need to ensure
that the ADMX files are available to the GPO Editor. What should you do?
A.
Copy the ADMX files to the % systemroot% \ inf folder on each Windows 7 computer, and then
restart the GPO Editor.
B.
Set the network share permissions to grant all Windows 7 users Read access for the share.
C.
Copy the ADMX files to the %systemroot% \ system32 folder on each Windows 7 computer,
and then restart the GPO Editor.
D.
Copy the ADMX files to the central store, and then restart the GPO Editor.
Answer: D

Microsoft   070-686 examen   070-686   certification 070-686   070-686

NO.14 Your company s network has client computers that run Windows 7. Multiple users share the computers
in the shipping department. These computers reside in the Shipping Computers
organizational unit (OU).
The company wants to deploy a new application. The application is not packaged.
You have the following requirements:
Deploy the application to all computers in the shipping department.
Perform the deployment from a central location.
You need to plan the software deployment process to meet the requirements.
Which two actions should you include in the process? (Each correct answer presents part of the
solution. Choose two.)
A.
Using Microsoft System Center Configuration Manager, create a collection that contains the
shipping department computers, and assign the package to the collection.
B.
Create a package by using Microsoft System Center Configuration Manager.
C.
Create a Group Policy object (GPO) and add a software installation policy under the Computer
Configuration container.
D.
In the Group Policy Management Console, link the software installation policy to the Shipping
Computers OU.
E.
Using Microsoft System Center Configuration Manager, create a collection that contains the
shipping department users, and assign the package to the collection.
Answer: AB

Microsoft   certification 070-686   070-686
Section: A

NO.15 You are designing an application deployment strategy.
Application deployments must meet the following requirements:
They must be able to use Setup.exe.
They must not require Active Directory.
The safer , easier way to help you pass any IT exams.
9 / 11
They must not require a constant network connection.
The application installation schedule must be easy to set up and implement.
You need to recommend a method that meets the requirements.
What should you recommend? (To answer, drag the appropriate deployment method from the list
of deployment methods to the correct location or locations in the work area.)
Answer:

NO.16 You are planning to upgrade Internet Explorer.
You have the following requirements:
- create a report that identifies which computers are succesfully upgraded
- do not install additional software on the client computers
You need to design a deployment method that meets the requirements.
What should you do?
A.
Use Windows Server Update Services (WSUS)
B.
Use Internet Explorer Administration Kit (IEAK) and Group Policy
C.
Use Microsoft System Center Configuration Manager
D.
Use Microsoft System Center Essentials.
Answer: A

certification Microsoft   070-686   070-686   070-686 examen   certification 070-686

NO.17 You deploy Windows 7 to the computers that are used by your companys Web developers. All
Web developer user accounts are in a single organizational unit (OU).
Internet Explorer is blocking pop-up windows for multiple internal Web applications that are hosted
on different servers.
You need to use Group Policy to ensure that Internet Explorer does not block pop-up windows for
internal Web applications.
What should you do?
A.
Enable Compatibility View in Internet Explorer.
B.
Add each server to the Intranet zone.
C.
Add each server to the Trusted Sites zone.
D.
Set the default security setting in Internet Explorer to Medium.
Answer: B

Microsoft examen   070-686 examen   070-686 examen   070-686   certification 070-686

NO.18 Your company has 1,000 client computers that run Windows XP Professional x64.
You are planning to deploy Windows 7 Enterprise x64.
The company uses an application that is incompatible with Windows 7 Enterprise x64.
You have the following requirements:
Provide all users with access to the application.
Deploy and manage the application by using a centralized solution.
You need to design a solution that meets the requirements.
What should you do?
A.
Install the application on all client computers by using Group Policy, and then use the
Compatibility tab.
B.
Install the Microsoft Application Virtualization (App-V) client on each client computer, and run
the application in offline mode.
C.
Install the Microsoft Enterprise Desktop Virtualization (MED-V) package on each client
computer.
D.
Install the Microsoft Application Virtualization (App-V) client on each client computer, and
stream the application by using App-V.
Answer: C

certification Microsoft   070-686   070-686

NO.19 Your company has two Active Directory Domain Services (AD DS) domains, Domain1 and
Domain2. A two-way trust relationship exists between the domains.
Users in both domains can log on to client computers in only their own domains. System logs on
the domain controllers display the error message Clock skew too great when users in Domain1
attempt to log on to client computers in Domain2.
You need to ensure that users can log on to client computers in both domains.
What should you do?
A.
Decrease the Maximum tolerance for computer clock synchronization setting in the default
Domain Group Policy object ( GPO ).
B.
Configure the primary domain controller (PDC) emulatorin each domain to synchronize its clock
with the same external time source.
C.
Run a startup script that includes Net Time /setsntp on all client computers.
D.
Run a startup script that includes Net Time /querysntp on all client computers.
Answer: B

Microsoft   070-686   070-686   certification 070-686   070-686

NO.20 Your companys network has client computers that run Windows 7.
When a user attempts to log on to the domain from a computer named Client1, she receives the
following message: The system cannot log you on to this domain because the system's computer
account in its primary domain is missing or the password on that account is incorrect.
You need to ensure that the user can log on to the domain from Client1.
What should you do?
A.
Disjoin and rejoin Client1 to the domain.
B.
Reset the account password for Client1 through Active Directory Users and Computers.
C.
Add the computer account for Client1 to the Domain Computers Active Directory group.
D.
Reset the account password for the user through Active Directory Users and Computers.
Answer: A

Microsoft   070-686   070-686   070-686   070-686   certification 070-686