Quand vous hésitez même à choisir Pass4Test, le démo gratuit dans le site Pass4Test est disponible pour vous à essayer avant d'acheter. Nos démos vous feront confiant à choisir Pass4Test. Pass4Test est votre meilleur choix à passer l'examen de Certification IBM C2180-374, et aussi une meilleure assurance du succès du test C2180-374. Vous choisissez Pass4Test, vous choisissez le succès.
On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification IBM C2180-374. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.
Vous avez aussi la possibilité à réussir le test IBM C2180-374. Pass4Test offre la service de la mise à jour gratuite pendant un an. Si vous échouez le test, votre argent sera tout rendu. Maintenant, vous pouvez télécharger la partie gratuite prendre examinser la qualité des produits de Pass4Test.
Nous assurons seulement le succès de test certification, mais encore la mise à jour est gratuite pour vous. Si vous ne pouvez pas passer le test, votre argent sera 100% rendu. Toutefois, cette possibilité n'est presque pas de se produire. Vous pouvez tout d'abord télécharger le démo gratuit pour prendre un essai.
Vous aurez le service de la mise à jour gratuite pendant un an une fois que vous achetez le produit de Pass4Test. Vous pouvez recevoir les notes immédiatement à propos de aucun changement dans le test ou la nouvelle Q&A sortie. Pass4Test permet tous les clients à réussir le test IBM C2180-374 à la première fois.
Il demande les connaissances professionnelles pour passer le test IBM C2180-374. Si vous manquez encore ces connaissances, vous avez besoin de Pass4Test comme une resourece de ces connaissances essentielles pour le test. Pass4Test et ses experts peuvent vous aider à renfocer ces connaissances et vous offrir les Q&As. Pass4Test fais tous efforts à vous aider à se renforcer les connaissances professionnelles et à passer le test. Choisir le Pass4Test peut non seulement à obtenir le Certificat IBM C2180-374, et aussi vous offrir le service de la mise à jour gratuite pendant un an. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.
Code d'Examen: C2180-374
Nom d'Examen: IBM (IBM WebSphere MQ V7.0, System Administration)
Questions et réponses: 111 Q&As
L'équipe de Pass4Test autorisée offre sans arrêt les bonnes resources aux candidats de test Certification IBM C2180-374. Les documentations particulièrement visée au test IBM C2180-374 aide beaucoup de candidats. La Q&A de la version plus nouvelle est lancée maintenant. Vous pouvez télécharger le démo gratuit en Internet. Généralement, vous pouvez réussir le test 100% avec l'aide de Pass4Test, c'est un fait preuvé par les professionnels réputés IT. Ajoutez le produit au panier, vous êtes l'ensuite à réussir le test IBM C2180-374.
C2180-374 Démo gratuit à télécharger: http://www.pass4test.fr/C2180-374.html
NO.1 Which of the following are performance enhancements to the Java Message Service
provider
implementation in IBM WebSphere MQ V7.0?
A. Read Ahead
B. Support for channel exits written in C/C++
C. Asynchronous Put
D. Message selection performed by Queue Manager
E. Ability to access all MQMD fields for IBM WebSphere MQ messages.
Answer: ACD
certification IBM certification C2180-374 certification C2180-374 C2180-374 examen C2180-374
NO.2 A company running IBM WebSphere MQ V5.3 on UNIX upgraded to IBM WebSphere
MQ V7.0.
Immediately after the migration, what is the administrator expected to do?
Start the:
A. MQSeries service
B. queue manager and listener simultaneously
C. queue manager before starting the listener
D. listener before starting the queue manager
Answer: C
IBM C2180-374 C2180-374 examen C2180-374 certification C2180-374
NO.3 Which features of IBM WebSphere MQ specifically provide robust message transport?
A. Data integrity, security, parallel processing
B. Asynchronous delivery, once and once-only delivery, persistent messaging
C. Time independence, no duplicate delivery, synchronous processing
D. Assured delivery, application parallelism, time dependent applications
Answer: B
IBM C2180-374 certification C2180-374 C2180-374
NO.4 An administrator has been asked to determine which files are needed to restart a
queue manager
configured with linear logging.
Which of the following MQSC commands will determine which log files are still required?
A. DISPLAY QMGR
B. DISPLAY QMSTATUS
C. DISPLAY QMSTATUS ALL
D. DISPLAY QMGR RESTART
Answer: C
IBM examen C2180-374 certification C2180-374
NO.5 An administrator has created the following MQ objects on two systems:
SYSTEM A
crtmqm -C "VEGGIE QUEUE MANAGER" -LL -Q -D POTATO VEGGIE
DEFINE QR(APPLE) RQMNAME(FRUIT) RNAME(PEACH)
DEFINE QL(DLQ)
DEFINE QL(POTATO) USAGE(XMITQ)
DEF CHL('VEGGIE. FRUIT') CHLTYPE(SDR) TRPTYPE(TCP)
CONNAME('9.84.100.7(1414)') +
XMITQ('POTATO')
SYSTEM B
crtmqm -C "FRUIT QUEUE MANAGER" -LL -Q -D GRAPE FRUIT
DEFINE QL(GRAPE) USAGE(XMITQ)
DEFINE QL(PEACH)
DEF CHL('VEGGIE. FRUIT') CHLTYPE(RCVR) TRPTYPE(TCP)
An application connects to queue manager VEGGIE and puts a message to queue APPLE.
On which
queue does the message get delivered before it gets picked up by the sender channel?
A. POTATO
B. APPLE
C. GRAPE
D. PEACH
Answer: A
IBM examen C2180-374 certification C2180-374 certification C2180-374
NO.6 An administrator wants to define a IBMWebSphere MQ object so that the applications
can be
prevented from sending messages to the processing applications queue APPQ, but continue
to allow
administrators to send test messages to the processing application. The application will send
messages
using an object
ABC.
What MQSC command should be used?
A. DEFINE QALIAS(ABC) BASEQ(APPQ)
B. DEFINE QALIAS(ABC) TARGET(APPQ)
C. DEFINE QREMOTE(ABC) TARGET(APPQ)
D. DEFINE QLOCAL(ABC) ALIASQ(APPQ)
E. DEFINE QMODEL(ABC) BASEQ(APPQ)
Answer: B
IBM certification C2180-374 C2180-374 certification C2180-374 C2180-374 examen
NO.7 A legacy application uses MQPUT to send messages to a queue INV. Which set of
MQSC commands
below will successfully configure the queue manager so that a number of
JMS applications can receive these messages by subscribing to topic
Inventory/CurrentItems?
A. DEFINE TOPIC(INV_TOPIC) + TOPICSTR(Inventory/CurrentItems)DEFINE QALIAS(INV)
TARGET(INV_TOPIC) TARGTYPE(TOPIC)
B. DEFINE TOPIC(INV_TOPIC) + TOPICSTR(Inventory/CurrentItems)DEFINE TALIAS(INV)
TARGET(INV_TOPIC) TARGTYPE(TOPIC)
C. DEFINE TOPIC (INV_TOPIC) + TOPICSTR(Inventory/CurrentItems) QALIAS(INV)
D. DEFINE QALIAS(INV) TARGET(Inventory/CurrentItems) + TARGTYPE(TOPIC)
Answer: A
IBM C2180-374 C2180-374
NO.8 What are the four predefined message types?
A. Request, response, publication, datagram
B. Publication, subscription, request, response
C. Request, reply, report, datagram
D. Request, broadcast, acknowledgment, response
Answer: C
certification IBM C2180-374 certification C2180-374
NO.9 An administrator using WebSphere MQ Explorer is unable to connect to queue
manager PROD after it
has been migrated, and receives error message SYSTEM.MQEXPLORER.REPLY.MODEL
not defined.
Which command will refresh the existing system objects to resolve this issue?
A. strmqm c PROD
B. strmqm a PROD
C. strmqm ss PROD
D. strmqm si PROD
Answer: A
certification IBM C2180-374 C2180-374 certification C2180-374 C2180-374
NO.10 For the Solaris platform, which databases are supported as a resource manager in
transactions
coordinated by IBM WebSphere MQ V7.0?
A. Oracle, Derby, My SQL
B. DB2, Derby, Teradata
C. DB2, Oracle, Informix, Sybase
D. DB2, SQL Server, Sybase, Informix
Answer: C
IBM certification C2180-374 C2180-374 C2180-374 certification C2180-374
NO.11 Which of the following statements are true, regarding applications that communicate
via
IBMWebSphere MQ?
IBM WebSphere MQ applications have to agree upon:
A. the platforms they are running on
B. the name(s) of the queue(s) used
C. the maximum number of messages sent within a given time period
D. the layout of the message data exchanged
E. the network protocol used
Answer: BD
IBM examen C2180-374 examen C2180-374 C2180-374
NO.12 An administrator has been asked to create a queue manager alias for QM1 to be used
for
communication
between remote queue managers.
What MQSC command will create the queue manager alias?
A. DEF QR(QM1.ALIAS) RNAME('Q1') RQMNAME(' ') XMITQ(QM1)
B. DEF QR(QM1.ALIAS) RNAME(' ') RQMNAME(QM1) XMITQ(QM1)
C. DEF QR(QM1.ALIAS) RNAME('Q1') RQMNAME(QM1) XMITQ(' ')
D. DEF QL(QM1.ALIAS) RQMNAME(QM1)
Answer: B
certification IBM C2180-374 C2180-374 examen certification C2180-374
NO.13 An administrator wants to prevent the channel initiator process from starting when a
queue manager
QMA on AIX is started.
Which action(s) will accomplish this?
A. Restart the queue manager using strmqm ns QMA.
B. Restart the queue manager using strmqm chinit no QMA.
C. Issue the command ALTER QMGR SCHINIT(DISABLED), then restart the queue
manager using
strmqm QMA.
D. Edit the file qm.ini for QMA and add an entry ChannelInitiator = No in the CHANNELS
stanza, then
restart the queue manager using strmqm QMA
Answer: A
IBM C2180-374 C2180-374 examen
NO.14 An administrator has created a queue manager on AIX system A, using the command
crtmqm ll QMA.
What command will create a backup queue manager for QMA on AIX system B?
A. crtmqm ll QMB
B. crtmqm ll QMA
C. crtmqm lb QMA
D. crtmqm ll backup QMA
Answer: B
IBM C2180-374 examen C2180-374 C2180-374
NO.15 Which Eclipse version is a prerequisite to use MQ Explorer to administer IBM
WebSphere MQ V7.0 on
Windows?
A. 3.3
B. 3.2
C. 3.1
D. 3.0
Answer: A
certification IBM C2180-374 certification C2180-374
NO.16 What are the advantages of using queue-sharing groups in IBM WebSphere MQ?
A. workload balancing, remote administration
B. improved performance, ease of monitoring
C. scalability, end-to-end security, data integrity
D. scalability, high availability, workload balancing
Answer: D
certification IBM C2180-374 examen C2180-374 C2180-374 examen
NO.17 An administrator created a queue manager Paint.queue.manager on AIX with circular
logging. The
administrator then was told that the system will be used for production, so the logging needs
to be
switched to linear.
How can the administrator make this change?
A. Edit "/var/mqm/mqs.ini" and change LogType=LINEAR
B. Edit "/var/mqm/qmgrs/Paint.queue.manager/qm.ini" and change LogType=LINEAR
C. Issue the MQSC command ALTER QMGR LOGTYPE(LINEAR)
D. Recreate queue manager with crtmqm -c "Paint shop" -ll -q Paint.queue.manager
Answer: D
IBM certification C2180-374 certification C2180-374
NO.18 An application deployed on z/OS was causing frequent abends.
Which of the following options from the IPCS Dump Component Panel can an administrator
use to
analyze
the problem?
A. CSQWDMP
B. ASMCHECK
C. DIVDATA
D. DAEDATA
Answer: A
IBM examen C2180-374 C2180-374 examen C2180-374 examen
NO.19 Which two user profiles are mandatory to correctly run IBM WebSphere MQ on
i5/OS?
A. QMQM, QMQMADM
B. QMQMADIM, mqm
C. mqm, QMQM
D. mqm, MUSR_MQADMIN
Answer: A
IBM C2180-374 examen C2180-374 examen C2180-374 C2180-374
NO.20 An administrator will install IBM WebSphere MQ on an AIX platform. There is a
requirement to
configure
the installation to store the queue managers data files under a directory tree different from
the default
specified by the installation.
After creating the appropriate directory tree, the administrator should:
A. specify the file location using the -ld option when running the crtmqm command.
B. add an entry for the variable MQSPREFIX in /var/mqm/service.env before running the
crtmqm
command.
C. edit /var/mqm/mqs.ini to specify LogDefaultPath in the LogDefaults stanza before running
the crtmqm
command.
D. edit /var/mqm/mqs.ini to specify DefaultPrefix in the AllQueueManagers stanza before
running the
crtmqm command.
Answer: D
IBM C2180-374 examen C2180-374 C2180-374 C2180-374 examen
Obtenez la Q&A de test IBM C2180-374 de Pass4Test plus tôt, vous pouvez réussir le test Certification IBM C2180-374 plus tôt.
没有评论:
发表评论