Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test 000-575 est lequel très important dans les tests de Certification IBM. Pour être qualifié de IBM, on doit obtenir le passport de test IBM 000-575.
Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.
Est-ce que vous vous souciez encore de réussir le test IBM 000-575? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.
Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.
Le test IBM 000-575 peut bien examnier les connaissances et techniques professionnelles. Pass4Test est votre raccourci amené au succès de test IBM 000-575. Chez Pass4Test, vous n'avez pas besoin de dépenser trop de temps et d'argent juste pour préparer le test IBM 000-575. Travaillez avec l'outil formation de Pass4Test visé au test, il ne vous demande que 20 heures à préparer.
Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test IBM 000-575, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.
Code d'Examen: 000-575
Nom d'Examen: IBM (IBM Tivoli Federated Identity Manager V6.2.2 Implementation )
Questions et réponses: 135 Q&As
000-575 Démo gratuit à télécharger: http://www.pass4test.fr/000-575.html
NO.1 What is a trust service chain in IBM Tivoli Federated Identity Manager V6.2.2 (TFIM)?
A. It is a defined set of WS-Trust security tokens, which together form a proof of trust and are organized
sequentially in their correct order of precedence.
B. It is a defined set of WS-Security trust tokens, which together form a proof of claim and are organized
sequentially in their correct order of precedence.
C. It is a defined set of individual processing module instances, collectively executed in a specific order,
with the interface to and roles for each module conforming to the WS-Trust model.
D. It is a defined set of individual processing module instances which are always executed in the specific
order required by the authentication flow, with the interface to and roles for each module conforming to the
WS-Trust model.
Answer: C
IBM examen certification 000-575 000-575 000-575 000-575
NO.2 A customer uses WebSEAL as the point of contact for IBM Tivoli Federated Identity Manager V6.2.2
(TFIM) where IBM Tivoli Access Manager (TAM) is configured to support Federal Information Processing
Standards (FIPS). When running the tfimcfg.jar tool this error is received:
FBTTAC1161 The SSL handshake failed. Retrying connection with certificate validation disabled
What must be done?
A. TFIM must be configured for SSL communication.
B. FIPS must be enabled on all TFIM WebSphere servers.
C. The TAM public certificates must be imported to the WebSphere trust store.
D. The tfimcfg.jar tool needs to run with the-sslfactory TLS argument.
Answer: D
certification IBM 000-575 000-575 000-575 examen
NO.3 What is always required when deploying the IBM Tivoli Federated Identity Manager V6.2.2 runtime and
management service?
A. WebSEAL
B. IBM HTTP Server
C. IBM Tivoli Identity Manager
D. IBM WebSphere Application Server
Answer: D
IBM examen certification 000-575 000-575 examen 000-575 examen
NO.4 Given IBM Tivoli Federated Identity Manager V6.2.2 configured as an OpenID provider, what is a
correct statement regarding processing of attributes when using an IBM Tivoli Directory Integrator
AssemblyLine as a mapping function?
A. Only requested attributes can be returned.
B. All attributes requested must be BASE64 encoded to ensure proper handling.
C. The AssemblyLine must assure that values for non-optional attributes are returned.
D. Requested attributes that have an empty value (not an empty string) must be removed and cannot be
returned.
Answer: C
IBM 000-575 000-575 examen 000-575 examen
NO.5 Custom Java mapping functions must be deployed into which IBM Tivoli Federated Identity Manager
V6.2.2 directory?
A. Plug-ins
B. Add-ins
C. Mappings
D. Extensions
Answer: A
IBM 000-575 000-575
NO.6 Which partner vouches for the identity of a user in a Single Sign-On federation?
A. Relying party
B. Attribute party
C. Service provider
D. Identity provider
Answer: D
IBM 000-575 certification 000-575 certification 000-575
NO.7 What is the default file name of the IBM Tivoli Directory Integrator log?
A. tdi.log
B. ibmdi.log
C. ibmdisrv.log
D. ibmdirectoryintegrator.log
Answer: B
IBM examen 000-575 000-575 000-575 examen 000-575 examen
NO.8 Which HTTP status code is always issued by an identity provider using SAML 1.1 Browser/POST when
communicating with the Assertion Consumer Service?
A. 101
B. 200
C. 206
D. 302
Answer: B
IBM 000-575 000-575 examen 000-575
NO.9 What is XSLT?
A. A concatenative language for transforming input XML documents into new documents, which typically
takes an XML source document and applies template rules to subexpressions, producing a new output
document.
B. A declarative language for transforming input XML documents into new documents, which typically
takes an XML source document and applies template rules in an XSLT stylesheet to it, producing a new
output document.
C. An imperative language for transforming input XML documents into new documents, which typically
takes an XML source document and applies template rules in an XSLT stylesheet to it, producing a new
output document.
D. A automata-based language for transforming input XML documents into new documents, which
typically takes an XML source document and applies template rules to transition element states,
producing a new output document.
Answer: B
IBM 000-575 000-575
NO.10 A company wants to establish a Federated Single Sign-On (FSSO) relationship with a partner identity
provider to allow partner administrator access. This company provides services for credit card processing.
What is the most secure choice for the FSSO protocol?
A. OpenID using Associate Mode
B. SAML 2.0 using HTTP Redirect/POST bindings, signed response, and signed assertion
C. SAML 1.1 using a Browser/POST profile, signed response and assertion, and a narrow assertion
validity window of only a few seconds
D. SAML 2.0 using an HTTP-Artifact binding, signed response and assertion, an encrypted assertion, and
a narrow assertion validity window of only a few seconds
Answer: D
IBM 000-575 000-575 examen 000-575 examen 000-575 examen 000-575
NO.11 When configuring WebSEAL as the point of contact for IBM Tivoli Federated Identity Manager V6.2.2
using the WebSEAL No ACLD profile, which configuration requirement(s) are relevant?
A. This option must be set: Disable Access Manager (IVCred) credential issuing (requires EAI to be
configured).
B. This option must be cleared: Enable Access Manager (IVCred) credential issuing (requires PDJRTE to
be configured).
C. This option must be set: Disable Access Manager (IVCred) credential issuing (requires EAI to be
configured); and the no-acid tag value attribute must be defined in the WebSEAL configuration.
D. This option must be cleared: Enable Access Manager (IVCred) credential issuing (requires PDJRTE to
be configured); and the no-acid tag value attribute must be defined in the WebSEAL configuration.
Answer: B
IBM certification 000-575 000-575
NO.12 Which roles are typically defined in an IBM Tivoli Federated Identity Manager V6.2.2 Single Sign-On
federation configuration?
A. Relying Party or Service Provider
B. Asserting Party or Service Provider
C. Identity Provider or Asserting Party
D. Identity Provider or Service Provider
Answer: D
IBM examen certification 000-575 000-575
NO.13 Click the Exhibit button.
Which three statements are true regarding this SAML 1.1 flow diagram.? (Choose three.)
A. The HTTP request in Step 3 is a GET.
B. The assertion is sent with an HTTP 200 response in Step 2.
C. An artifact value is sent with an HTTP 302 response in Step 2.
D. This is a Browser/POST profile, so in Step 3 the assertion is sent to the Assertion Consumer Service
endpoint through an HTTP POST of an HTML form.
E. The HTTP response in Step 5 must be a 302 redirect based upon the resource requested and the
user's authorized access which is determined by the response in Step 4.
F. This is a Browser/Artifact profile, so the artifact received in Step 2 must be sent to the Artifact
Resolution Service in Step 3, and the assertion must be retrieved through a SOAP backchannel in Step 4.
Answer: A,C,F
certification IBM 000-575 certification 000-575 certification 000-575 000-575 000-575 examen
NO.14 Which statement is true about the IBM Tivoli Federated Identity Manager V6.2.2 Business Gateway?
A. Users can use several gateway protocols.
B. Users can access external Web services.
C. Users can create Federated Single Sign-On partnerships with multiple providers.
D. Users cannot create Federated Single Sign-On partnerships with multiple providers.
Answer: C
certification IBM 000-575 examen certification 000-575
NO.15 Which statement is true regarding event pages when creating a federation in IBM Tivoli Federated
Identity Manager V6.2.2 (TFIM)?
A. Event pages are tied to a protocol and not to a specific federation.
B. Event pages must be created (or copied from the defaults) and stored in the federation event directory.
C. Event pages can use the @FEDSTATUS@ macro to provide detailed Single Sign-On status
information to the user.
D. When creating event pages for a federation, it is important to append the federation name to the event
page filename so the TFIM runtime will use that instead of the default protocol event page.
Answer: A
IBM certification 000-575 000-575
NO.16 What does this XSL code do?
<xsl:template match-'@* | node()">
<xsl:copy>
<xsl:apply-templates select="@* | node()"/>
</xsl:copy>
</xsl:template>
A. It makes a copy of the template transforms on the input document.
B. It performs a series of transforms on a copy of the input document.
C. It creates a new copy of the input document, copying all attributes, but not elements.
D. It creates a new copy of the input document, copying all elements, but not attributes.
Answer: B
certification IBM 000-575 examen 000-575 000-575 000-575 000-575
NO.17 When is IBM WebSphere Application Server required for IBM Tivoli Federated Identity Manager V6.2.2
(TFIM)?
A. It is always required for TFIM.
B. When it is used as the point of contact.
C. When the Management Console GUI is used.
D. When Web Services Security Management is used
Answer: A
IBM 000-575 000-575 examen certification 000-575
NO.18 What is always required when creating an IBM Tivoli Federated Identity Manager V6.2.2 (TFIM) Single
Sign-On federation partner?
A. A signer certificate
B. A login protocol endpoint
C. A metadata file containing the partner definitions
D. A federation default or partner-specific mapping rule or function
Answer: D
certification IBM certification 000-575 000-575
NO.19 A client has installed IBM Tivoli Federated Identity Manager V6.2.2 (TFIM) and is establishing a SAML
1.1 Single Sign-On (SSO) configuration with a service provider (SP). The client wants to provide
SP-initiated Federated SSO. How can this be accomplished?
A. A link or redirect to the SP login endpoint with the parameters SP_PROVIDER_ID and target can be
used to initiate the protocol at the SP. The SP will then redirect the user to the corresponding identity
provider (IdP) login endpoint.
B. A link or redirect to the SP login endpoint with the parameters IDP_PROVIDER_ID and target can be
used to initiate the protocol at the SP. The SP will then redirect the user to the corresponding IdP login
endpoint.
C. Because a SP-initiated sign-on is not supported in SAML 1.1, this can be simulated by using a link or
an HTTP 302 redirect to the IdP login endpoint with the query string parameters SP_PROVIDER_ID and
TARGET to initiate the protocol.
D. Because a SP-initiated sign-on is not supported in SAML 1.1, and only an HTTP POST to the IdP can
be used to initiate the protocol, the SP must generate an HTTP 200 response containing a form with the
SP_PROVIDER_ID and target values which is self-posted to the IdP login endpoint.
Answer: C
IBM 000-575 000-575 000-575 certification 000-575
NO.20 What does SAML stand for?
A. System Access Markup Language
B. Security Assertion Markup Language
C. Server Authenticated Markup Language
D. Secure Authentication Markup Language
Answer: B
IBM 000-575 000-575
Dans n'importe quelle industrie, tout le monde espère une meilleure occasion de se promouvoir, surtout dans l'industrie de IT. Les professionnelles dans l'industrie IT ont envie d'une plus grande space de se développer. Le Certificat IBM 000-575 peut réaliser ce rêve. Et Pass4Test peut vous aider à réussir le test IBM 000-575.
没有评论:
发表评论